Dilational Rheological Properties of P-(n-alkyl)-benzyl Polyoxyethylene Ether Carboxybetaine at Water–Decane Interface

The dilational rheological behaviors of absorbed films of p-(n-alkyl)-benzyl polyoxyethylene ether carboxybetaine C_xBE₂CB (x = 8, 10, 12) at the water–decane interface have been investigated by the drop-shape analysis method. The influences of time, oscillation frequency, and bulk concentration on dilational modulus and phase angle have been expounded. The experimental results show that the phase angle of C_xBE₂CB (x = 10, 12) decreases with the increase of time, the slope of the log ? ? log ω curve and phase angle of C_xBE₂CB (x = 10, 12) decrease in a wide concentration range. These phenomena become more and more apparent with the increase of hydrocarbon chain length and it cannot be attributed to the diffusion-exchange process between the bulk and the interface. It is reasonable to consider that ethylene oxide groups are flexible and can be compressed and expanded, just like a spring. Therefore, the compression and expansion of the ethylene oxide groups in the interfacial layer and the exchange between interface and sublayer play a more important role for C_xBE₂CB (x = 10, 12) adsorption film. The dependence of dilational modulus on interfacial pressure can support our provided mechanism strongly.     

Effects of Microcrystalline Cellulose on Suspension Stability of Cocoa Beverage

The rheological properties and particle size distributions of cocoa beverage as well as aggregate structures of solid particles were studied to elucidate the effects of microcrystalline cellulose (MCC) on suspension stability of solid particles in cocoa beverage. Fluidity curve, dynamic viscoelasticity, particle size distribution, and SEM observation were made for beverage samples containing 0.1–0.5 wt% MCC and 11 model samples with various combinations of six ingredients. This revealed that cocoa and MCC particles are highly cohered into an aggregate and the aggregated particles further interact weakly with the milk component, leading to stabilization of the whole system of cocoa beverage.     

A Surface Rheological Study of Polyoxyethylene Alkyl Ether Carboxylic Salts and the Stability of Corresponding Foam

The dynamic dilational viscoelastic properties of polyoxyethylene alkyl ether carboxylic salts at the air-water interface were investigated by drop shape analysis method and their foam stability were measured by Bikerman Method. The influences of time, dilational frequency, and bulk concentration on surface dilational modulus and phase angle were expounded. The results show that the surfactant with the longest straight-chain shows the highest dilational modulus, which in agreement with the best foam stability. However, the foam stability of branched-alkyl chain surfactant cannot be explained in terms of film elasticity alone.     

The Fast Relaxation Process between Hydrophobically Modified Associating Polyacrylamide and Different Surfactants at the Water‐Octane Interface

In our previous work (Macromolecules 2004, 37:2930), we found that the hydrophobic blocks of polyacrylamide modified with 2‐phenoxylethyl acrylate (POEA) and anionic surfactant sodium dodecyl sulfate (SDS) may form mixed associations at octane/water interface. However, the process involving the exchange of surfactant molecules between monomers and mixed associations in interface is so fast that we cannot obtain its characteristic time. In this article, the interfacial dilational viscoelastic properties of another hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2‐ethylhexyl acrylate (EHA) (<1.0 mol%) at the octane‐water interfaces were investigated by means of oscillating barriers method and interfacial tension relaxation method respectively. The influences of anionic surfactant SDS and nonionic surfactant Triton X‐100 on the dilational viscoelastic properties of 7000 ppm polymer solutions were studied. The results showed that the interaction between P(AM/2‐EHA) and SDS was similar to that of P(AM/POEA) and SDS. Moreover, we got the relaxation characteristic time of the fast process involving the exchange of s Triton X‐100 molecules between monomers and mixed associations.

We also found that the interfacial tension response of hydrophobically associating water‐soluble copolymers to the sinusoidal oscillation of interfacial area at low bulk concentration is as same as that of the typical surfactants: the interfacial tension decreases with the decrease of interfacial area because of the increase of interfacial active components. However, the interfacial tension increases with the decrease of interfacial area at 7000 ppm P(AM/2‐EHA), which is believed to be correlative with the structure of absorbed film. The results of another hydrophobically associating polymer P(AM/POEA) and polyelectrolyte polystyrene sulfonate (PSS) enhanced our supposition. The phase difference between area oscillation and tension oscillation has also been discussed considering the apparent negative value.     

MWCNTs与疏水纳米SiO_2填充PMMA/PS共混物的导电与动态流变行为

以多壁碳纳米管(MWCNTs)为导电填料、疏水纳米二氧化硅(SiO2)为非导电填料,填充不相容聚甲基丙烯酸甲酯(PMMA)/聚苯乙烯(PS)(1/1,V/V)共混物,制备(PMMA/SiO2)/(PS/MWCNTs)四元导电高分子复合材料(CPC),研究其导电逾渗与动态流变行为,并与PMMA/(PS/MWCNTs)三元CPC进行对比.发现三元、四元CPC具有类似的导电逾渗行为,且逾渗阈值显著低于PS/MWCNTs二元CPC.在四元CPC中,SiO2粒子可细化相区尺寸,提高熔体模量,但不影响熔体热处理过程中的依时性动态导电逾渗行为.MWCNTs与SiO2均显著影响熔体热处理中的依时性模量逾渗行为,分别缩短、延长四元CPC相粗化起始时间,但均延长相粗化时间区间.     

Nanoindentation in Crystal Engineering: Quantifying Mechanical Properties of Molecular Crystals

Nanoindentation is a technique for measuring the elastic modulus and hardness of small amounts of materials. This method, which has been used extensively for characterizing metallic and inorganic solids, is now being applied to organic and metal–organic crystals, and has also become relevant to the subject of crystal engineering, which is concerned with the design of molecular solids with desired properties and functions. Through nanoindentation it is possible to correlate molecular‐level properties such as crystal packing, interaction characteristics, and the inherent anisotropy with micro/macroscopic events such as desolvation, domain coexistence, layer migration, polymorphism, and solid‐state reactivity. Recent developments and exciting opportunities in this area are highlighted in this Minireview.     

Precise determination of dissolved silica in seawater by ion-exclusion chromatography isotope dilution inductively coupled plasma mass spectrometry

Ion exclusion chromatograph (IEC) isotope dilution (ID) inductively coupled plasma mass spectrometry (ICP–MS) (IEC–ID–ICP–MS) was developed for measurement of dissolved silica in seawater, which was applied to production of certified reference materials (CRMs) of three concentration levels of nutrients (high, medium and low levels). IEC–ICP–MS has been employed to separate dissolved silica from seawater matrix. In the present study, in order to solve substantial problems due to spectral interference in ICP–MS and to improve the accuracy of IEC–ICP–MS beyond standard addition or conventional calibration methods, ID method was coupled with ICP-sector field mass spectrometry (operated under medium resolution,i.e., m/Δm = 4000). In addition, effects of various operating parameters in ICP–MS on a silicon background level were also investigated to obtain lower background equivalent concentration (BEC). As a result, 3 ng g⁻¹ of the BEC and 0.5 % of relative standard uncertainties were achieved in the analyses of dissolved silica in seawater samples at concentration levels from 4.0 mg kg ^-1 to 0.8 mg kg⁻¹ as silicon. The developed method was successfully validated by analyses of an artificial seawater containing a known amount of silicate and the seawater certified reference material MOOS-2 produced by the National Research Council Canada.     

内扩散对煤和石油焦水蒸气气化反应性能的影响

以内蒙褐煤、神府烟煤、遵义无烟煤和石油焦为研究对象,借助热重分析仪,进行了水蒸气气化动力学研究,得到了4种样品焦的本征动力学方程,分析了水蒸气分压和粒径对气化反应的影响。基于幂函数模型得到的动力学参数,结合气固催化理论,提出了计算内扩散效率因子(η)的方法。计算效率因子(ηcal)和实验效率因子(ηexp)的对比结果表明,使用该方法得到的内扩散效率因子可以用于定量评估水蒸气气化反应中内扩散过程的影响程度。     

正交各向异性材料热弹性问题的三维无网格法计算模型及应用

建立了正交各向异性材料热弹性问题的三维无网格伽辽金(Element Free Galerkin, EFG)法计算模型。利用该计算模型对三维复合材料汽轮机叶轮和轴承座进行了热弹性分析,对比了材料方向角及热导率因子、热膨胀系数因子和拉压弹性模量因子不同组合情况下轴承座的最大热变形总位移和当量应力值,讨论了材料方向角及上述正交各向异性因子对热变形和当量应力的影响规律,并与各向同性材料进行了对比。结果表明:三维EFG模型的热变形总位移和当量应力相对误差范数分别比有限元法小0.1215%和0.1359%;材料方向角同时影响热变形的大小和方向,但对当量应力方向影响不大;正交各向异性材料因子主要影响热变形和当量应力的大小。在考虑热-机械载荷作用下的三维复合材料零件结构设计中,当以刚度或强度为主要需求时,材料方向角、热导率因子、热膨胀系数因子、拉压弹性模量因子分别在(45°~60°,8:1:4~10:1:5,(1/6):(1/5):1~(1/5):(1/4):1,(7/5):1:(9/5)~(3/2):1:2)或(0°~10°,(1/10):1:(1/5)~(1/8):1:(1/4),(1/5):1:(1/6)~(1/4):1:(1/5),1:(1/5):(1/10)~1:(1/4):(1/8))范围内取值能有效降低轴承座等结构的热变形和当量应力。     

基于等效阻尼理论的金属橡胶弹性迟滞力学模型及实验研究

针对弹性多孔金属橡胶非线性迟滞特性力学行为,将迟滞恢复力-位移曲线分解为非线性单值曲线和椭圆,并将等效阻尼理论用于动态力学性能参数识别,从而建立了一种新型的适用于黏弹性阻尼材料的宏观唯象力学模型。采用不同相对密度的环形金属橡胶进行动态实验测试,以验证理论模型的准确性,结果表明该模型可将具有非线性特性的金属橡胶系统进行降阶处理,提高金属橡胶力学模型的预测效率,并能很好地描述金属橡胶的迟滞力学行为。另外,研究了在不同激励频率条件下金属橡胶的阻尼耗能特性。实验结果表明:在高频加载的条件下,黏性阻尼系数对动态加载频率不敏感,阻尼耗能与加载幅值之间呈线性正相关。基于等效阻尼理论的弹性迟滞力学模型具有一定的普适性,可进一步推广应用于类似弹性多孔材料的力学性能表征,为其工程应用提供理论基础。